HOW TO USE
The first step in using this stitching device is to load the four AA batteries. The batteries go in the compartment on the bottom. After loading the batteries, the sewer should set up the bobbin and thread the machine.
Positioning the Bobbin
To position the thread correctly, you should locate the thread holder on the side. After pulling off the bobbin holder and spring underneath it, slide on the bobbin.
Threading the Insta-Stitch™
The thread goes from the bobbin through the first thread guide on the needle arm, through the two plates in the tension control, and through the second thread guide at the end of the needle arm.
Sewing with Insta-Stitch™
The machine sews from left to right. Hold the fabric with the left hand, giving it some gentle tension, and turn the machine on, using the power switch on the top. The fabric feeds by itself into the machine.